- KNX S-mode or KNX PL-Link communication
- For round shaft with a diameter of 8...16 mm, square shaft 6...12.8 mm, min. shaft length 30 mm
- With position indicator and adjustable mechanical stop
- Clutch release button to allow manual adjustment
- With a steel base, a plastic cover and an attached cable of 0.9 m
Our offer
- Sensorsaddremove
- Smoke detection
- Frequency convertersaddremove
- Energy measurementaddremove
- Accessories for switchboardsaddremove
- Industrial thermoregulationaddremove
- Signal converters
- Regulatorsaddremove
- Relayaddremove
- Water regulationaddremove
- Servo drivesaddremove
- Mixing units for air conditioningaddremove
- Variousaddremove
- Sources of alternating and direct voltageaddremove
chevron_left
chevron_right
-29%
Servo drive Siemens GLB111.1E/KN
Servo drive with KNX communication for ventilation dampers, 10Nm, 24V AC, changeover time 150 s
Description
Data sheet
GLB111.1E/KN
- Power supply
- 24V AC
- Caliper range
- Ø 8...16 mm, □ 6...12 mm
- Electrical coverage:
- IP54
- Torque:
- 10 Nm
- Flap size up to approx
- 1.5 m²
- Emergency functions:
- NO
- 90° motor adjustment time
- 150 s
- Control:
- KNX bus (mode S, LTE, PL-link)
- SPDT Auxiliary Switch:
- NO
- Direction of rotation:
- Switchable mechanically
- Connection:
- Cable 0.9 m
- Ambient temperature:
- 0...+ 50 °C
- Position signal:
- KNX-TP
You might also like
chat
Comments (0)