PA-10 converter

The converter is intended for converting the control signal for a 3-point controlled servo drive (opens, stops, closes) into a signal for a continuously controlled servo drive (0-10 V, 2-10 V).

Basic features of the PA-10 converter:

• all parameters are determined simply by means of shorting jumpers (jumpers)
• possibility to choose the output voltage range for controlling servo drives or frequency converter (0-10 V, 2-10 V)
• 24 V AC power supply
• input signals 24 V AC/DC
• setting of the output state at power-on (min./max.)
• setting the 3-point servo drive run time (integration time)

The function is signaled by an LED diode. The converter adds the opening and closing times of the servo drive to the input signals and calculates the current position for the continuously controlled servo drive according to the set time of the 3-point servo drive. Protection against dangerous contact is ensured by a low safe voltage. It is connected with a 4-core cable with a core cross-section of about 0.5 - 1 mm ² .